Delta RowCool HCH1CH0 User Manual page 24

Lower power feed
1
2
InfraSuite RowCool Precision Cooling –
Chilled Water
The lower power feed is at the left lower part of the unit. Use nippers to remove the
knocking-piece on each power supply's cover plate, take out each cable gland from
the accessory package, remove its nut, rotate and tighten the cable gland on the
cover plate, and pass the power wires through it.
(Figure 3-18: Lower power feed position)
Feed A is at the left side and Feed B is at the front. Use a screwdriver to loosen the
screws of the terminal block and insert R, S, T, N, and G wires into it and lock them.
(Figure 3-19: Power input wiring position and wiring approach)
NOTE:
Only the model of HCH1CD0 supports lower power input.
FEED B
20