3. The bottom casters are only suitable for short distance movement. For long distance
movement, use a handling device (such as Fig. 3-2 Forklift handling) so as to avoid
damage to the casters.
moving of the unit on uneven ground, which may damage the casters or even result in
toppling.
5. When moving the unit, pay attention to its height and center of gravity. At least two
people working together should handle the unit so as to guarantee safety.
Levelers
After moving the unit into place, use a wrench to rotate clockwise the four levelers beside
topple.
WARNING:
The levelers are only used for leveling the unit and cannot be used to compensate
(Figure 3-2: Forklift handling)
(Figure 3-3: Levelers)
13
Chapter 3
Installation