Product Detail; Dip Switch Settings; Sw2 And Sw3: Timeout Setting - Belkin F1U128-KIT User Manual

Product Detail

Device activity LEDs
Connector to Device A
Connector
to PC1
Connector to PC2
DIP switch settings (located underneath switch):
SW1: Reset Switch
To reset, OFF ON OFF

SW2 and SW3: TimeOut Setting

TimeOut is the amount of time the switch remains locked on a PC port after
data transfer. Use a longer TimeOut when connecting to scanners, mass
storage devices and for large print jobs.
SW2 SW3
ON ON
ON OFF
OFF ON
OFF OFF
Connector to Device B
Connector to PC3
Printer button
PC activity LEDs
1 2 3 4
ON is UP. SW4 is not used.
TimeOut
5 seconds
10 seconds
Recommended
20 seconds
40 seconds
3
Connector
to PC4
DC power jack
(side)
Computer button
ON DIP