USB peripherals among up to four connected computers. Operating Systems Automatic USB Printer Sharing The Belkin 4x4 USB Peripheral Switch is for use with computers running: The automatic USB printer-sharing feature allows you to send print jobs to your printer without using the manual push buttons.
Mount Slots Computer- Indicating LEDs Push-Button Selectors Specifications Device- Part No.: F1U400 Indicating LEDs Power: 5V DC, 2.5A AC Adapter (required) USB Device Port Connector: USB Type A Receptacle Back View of the 4x4 USB Peripheral Switch USB Computer Port Connector:...
8. When the InstallShield Wizard is complete, click “Finish”. 2. Double-click on “My Computer”. 3. Double-click on the CD-ROM drive. 4. Double-click on the folder named “F1U400”. 5. Double-click on the file named “Setup.exe”. 6. Click “Next” on the InstallShield Wizard.
Page 6
In order to begin using the Belkin 4x4 USB Peripheral software, please open the Belkin 4x4 USB Peripheral Switch application located in the file named “Belkin”. The file named “Belkin” is located on the desktop. You are now ready to use your Belkin 4x4 USB Peripheral Switch software.
Page 7
1. Place the CD in the CD tray of your Mac computer. 2. Double-click on the CD-ROM disk located on your desktop. 3. Drag the icon with the file named “F1U400 Mac OS X files.sit” to your desktop. 10. Click on “Continue” to begin installation.
Switch. You are now ready to use your Belkin 4X4 USB Peripheral Switch software. Note: Automatic printing feature is not supported in Mac OS. Repeat steps 1 and 2 for each additional USB computer you wish to connect.
INSTALLATION SWITCHING THROUGH SOFTWARE Step 2: Powering On the Switch Legend Icons for USB Devices 1. Connect the included 5V DC, 2.5A AC power supply adapter into an available power outlet. Camera Device Ethernet Generic Gaming Device Device Device 2. Attach the barrel plug into the power jack of the Switch. Speakers Mass Storage Scanner...
SWITCHING THROUGH SOFTWARE SWITCHING THROUGH SOFTWARE Switching USB Devices Automatic Printing Select the 4x4 USB Peripheral Switch icon located on your desktop. To switch In order to enable automatic printing, double-click on the printer icon located in USB devices, drag the USB device icon from the “General Basket” to the “Active the General Basket.
SWITCHING THROUGH SOFTWARE FAQs Naming Your Computers Does the Switch support USB 2.0 devices? Yes, your USB 2.0 device will work with the Switch but will only transfer The Switch software will allow you use up to eight characters when naming data up to 12Mbps.
Make sure the connected USB device is not further than 15 feet away. Belkin Corporation warrants this product against defects in materials and workmanship for its warranty period. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is •...