Table of Contents
Advertisement
Appendix
1. Normal (Output only)
2. Bi-directional (default)
3. ECP (requires IEEE 1284 printer/parallel cable)
7.
Select ECP and click OK to save results and close the window.
8.
Click Yes to restart the computer.
NOTE: Changes made in the Sony Notebook Utility are also made in the BIOS.
Sony PCG-729:
1.
In Windows
®
95, open the Start Menu.
2.
Select Tool Center.
3.
Select Sony Notebook Setup.
4.
Select the Printer/FDD tab.
5.
Make sure Use as printer connector is selected and choose the desired port
mode required by the printer. There are three options available on this screen:
1. Normal (Output only)
2. Bi-directional (default)
3. ECP (requires IEEE 1284 printer/parallel cable)
6.
Select ECP and click OK to save results and close the window.
7.
Click Yes to restart the computer.
NOTE: Changes made in the Sony Notebook Utility are also made in the BIOS.
(continued)
33
Advertisement
Table of Contents
