Calling Up Information Messages; Calling Up Help - Lenze EPM-H315 Operating Instructions Manual

Show/Hide Bookmarks
Operation
1 2 3
4 5 6
7 8 9
0
5.3

Calling up information messages

•
Information messages
– are texts which appear because of a certain event (e.g. if an actual value exceeds a limit),
– can only be called as long as the triggering event is active,
– must have been programmed in the planning tool "HMI Designer",
– can have a maximum of 2 lines of 20 characters.
•
The last but one line is a programmable message field. This field indicates the numerical value
of the variable that triggered the message.
•
The LED
If you want to ...
call up an information message.
A.
•
Information messages called up for the first time Information messages called up for the first time
are marked by **. k d b **
select the previous or next information message.
B.
C. close the information message.
5.4

Calling up help

•
Help messages
– can be assigned to pages or information messages.
– contain useful notes which make handling easier.
– must have been programmed in the planning tool "HMI Designer".
•
The LED
If you want to ...
A. call up a help message.
B. close a help message.
48
Info
will flash if a message is available.
Press keys ...
Help
will flash if a message is available.
Press keys ...
EDBEPM-H315 DE/EN/FR 2.0
Example
Pressure exceeds Pressure exceeds Pressure exceeds
Info
the safety limit the safety limit the safety limit
125.5 125.5 125.5
PgUp
PgDN
or Water level below the Water level below the Water level below the
working threshold working threshold working threshold
40 40 40
Clr
Esc
Example
Help
Clr
Esc
** ** **
L