Show/Hide Bookmarks
1
1.1
1.2
L
Preface and general information
The EPM-H315 keypad can be used to access codes of Lenze controllers, 9300 Servo PLC and Drive
PLC and to facilitate the use of these devices.
The HMI Designer is a powerful development environment for creating projects containing the
configuration of the keypad.
The EPM-H315 keypad can be used with:
•
8200 frequency inverters (with AIF function module for system bus CAN)
•
8200 vector frequency inverters
•
93XX servos
•
9300 Servo PLC
•
Drive PLC
Controller connection via system bus (CAN)
About these Operating Instructions
•
These Operating Instructions are designed to ensure safe and trouble-free working on and with
the EPM-H315 keypad.
•
All persons working on and with the EPM-H315 keypad must keep these Operating Instructions
to hand and observe all relevant information and notes.
•
These Operating Instructions must always be kept as a complete legible document.
Terminology used
Term
Meaning in this document
Controller
Lenze 8200 and 8200 vector frequency inverters, 9300 servo inverters
HMI
Human Machine Interface
Preface and general information
EDBEPM-H315 DE/EN/FR 2.0
31