Whyte 20C Supplementary Service Manual page 10

Item:
1 Whyte Seat Clamp Band
2
3 Whyte Main Frame
4
5 M6 x 30mm Fastener
6
Bolt-up Type: Fig.2
Tools Required:
(Note, refer to the seat-pin manufacturers instructions in conjunction with these notes).
To adjust the seat height, using the 5mm Allen key, undo the M6 bolt (5) just enough to allow
the seat-pin to slide freely up and down. Set the height to the desired level, and re-tighten the
M6 bolt (5) with the 5mm Allen Key just enough so as to prevent the seat-pin from slipping down
and twisting.
Item
1 QR Lever Cam Grub Screw
2
3 Whyte QR Lever
4
5 Whyte Main Frame
6 Whyte Seat Clamp Band
7 QR Adjuster Bobbin
8
9
To Adjust the seat height with the QR Lever assembly fitted, simply undo the QR Lever (3) from
the Closed position to the Open position. Next adjust the height of the Seat Pin to the desired
level, and close the QR lever (3) from the Open position to the Closed position. The QR closing
force can be adjusted by turning the QR Adjuster Bobbin (7) clockwise or anti-clockwise before
closing the QR Lever (3).
Page 10
WHYTE Service Manual
Description
T-Pad
Barrel Nut
M6 Washer
5mm Allen Key
Description
QR Lever Cam
Plastic Shim
QR Shaft
T-Pad
Fig.2: Getta-Grip Seat Clamp: Bolt-up
Fig.3: Getta-Grip Seat Clamp: QR Lever
2010 Edition 1