Main Menu - SMC Networks SMCGS16-Smart Management Manual

Main Menu

Using the onboard web agent, you can define system parameters, manage
and control the switch, and all its ports, or monitor network conditions.
The following table briefly describes the selections available from this
program.
Menu
STATUS
Overview
Statistics
SYSTEM
Name
LAN Settings
Password
Tools
Restore to Factory
Defaults
Upgrade Firmware
Restart
Register Product
PORTS
Settings
Rate Limiting
N
AVIGATING THE
Table 2-1 Switch Main Menu
Description
Provides basic system description, including
system information, address information, port
information, trunk information, and VLAN
information.
Shows statistics for port, interface, and
RMON.
Shows the name of the switch.
Sets LAN IP address, subnet mask, and
gateway IP address.
Changes password.
Force the Switch to perform a power reset
and restore the original factory settings.
Upgrade the Switch system firmware using a
file provided by SMC.
Restarts the switch.
Registers the switch online.
Configure the speed and duplex mode of the
port.
Sets the rate limiting parameters for each port
on the Switch
W B
EB ROWSER
I
NTERFACE
Page
6
6
10
13
13
14
15
16
16
17
17
18
18
18
19
7