Equipment Checklist; Selecting A Site - SMC Networks SMC8506T Installation Manual

Ez switch 1000 10/100/1000 gigabit copper switch

Hide thumbs Also See for SMC8506T:

Table of Contents

Installing the SMC EZ Switch 1000

Equipment Checklist

After unpacking the EZ Switch 1000, check the contents of the box

to be sure you have received the following components:

Check the contents of your package for following parts:

6 port 10/100/1000 Copper Gigabit Switch

Power cord

19" rack mount brackets.

RS232 cable

SMC Warranty Registration Card

This User Guide

Be sure to follow the site selection guidelines below when choosing a

location:

Select a suitable location for the switch:

1. It should be accessible for installing, cabling and

maintaining the switch.

2. The temperature and humidity should be within the

ranges listed in the specifications.

3. The status LEDs should be clearly visible.

4. There should be adequate space (approximately two

inches) on all sides for proper air flow.

Make sure twisted-pair cable is always routed away from power

lines, fluorescent

Chapter 2

Table of Contents