Fcc Class A - SMC Networks SMC8506T Installation Manual

FCC Class A

This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in commercial environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in
accordance with the instruction manual may cause harmful interference to radio communications. Its
operation in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
EC Conformance Declaration - Class A
SMC contact for these products in Europe is:
SMC Networks Europe,
Edificio Conata II,
Calle Fructuós Gelabert 6-8, 2 , 4 ,
o a
08970 - Sant Joan Despí,
Barcelona, Spain.
This information technology equipment complies with the requirements of the Low Voltage Directive
73/23/EEC and the EMC Directive 89/336/EEC, and carries the CE Mark accordingly. It conforms to
the following specifications:
EMC: EN55024 (1998)/CISPR-22 (1995) Class A
IEC 61000-4-2 (1995)
IEC 61000-4-3 (1995)
IEC 61000-4-4 (1995)
IEC 61000-4-5 (1995)
IEC 61000-4-6 (1995)
IEC 61000-4-11 (1995)
COMPLIANCES
4 kV CD, 8 kV AD
3 V/m
1.0 kV - (power line)
0.5 kV - (signal line)
2 kV - (line to line)
1 kV - (line to ground)
3 Vrms
Voltage dip >95% - 10 ms
30% - 500 ms
60% - 100 ms
Voltage interruption >95% - 5000 ms