Table of Contents
Advertisement
I
NSTALLING THE
Ethernet Cabling
To ensure proper operation when installing the switch into a network,
make sure that the current cables are suitable for 10BASE-T or
100BASE-TX operation. Check the following criteria against the current
installation of your network:
•
Cable type: Unshielded twisted pair (UTP) or shielded twisted pair
(STP) cables with RJ-45 connectors; Category 3 or better for
10BASE-T and Category 5 or better for 100BASE-TX.
•
Protection from radio frequency interference emissions
•
Electrical surge suppression
•
Separation of electrical wires (switch related or other) and
electromagnetic fields from data based network wiring
•
Safe connections with no damaged cables, connectors or shields
3-2
S
WITCH
RJ-45 Connector
Figure 3-1. RJ-45 Connections
Advertisement
Table of Contents
