Side-Panel Rj-45 Ports; Rear And Bottom Panel Tracks - SMC Networks SMC6405TX User Manual

Side Panel
Connectors

Side-Panel RJ-45 Ports

The side-panel ports are dual-speed RJ-45 ports that support
auto-configuration for MDI or MDI-X cable connection. PCs ,
switches or hubs can be connected to these ports with
straight-through cable. Each port supports auto-negotiation, so the
optimum communication mode (half or full duplex) and data rate
(10 Mbps or 100 Mbps) are selected automatically.

Rear and Bottom Panel Tracks

The tracks on the rear and bottom panels are designed to slide
into the switch stand for a variety of installation options. The
rear-panel track is used for wall-mounting or to lay the switch on a
flat surface. The bottom-panel track is used to stand the switch
upright.
EZ Switch 10/100 SMC6405TX Front Panel
D
ESCRIPTION OF
Switch Stand
H
ARDWARE
3