Ferris SRS Z2 Series Operator's Manual page 18

12
Gradually move both ground speed control levers evenly
FORWARD from neutral. Slow down and repeat.
Note: Straight forward travel takes practice. If the unit veers to
either direction while both ground speed controls levers are
pressed against the maximum forward speed bar see Tracking
Adjustment in the Maintenance Procedures section.
Reverse Travel Practice
13
LOOK DOWN & BEHIND, then gradually move both ground
speed control levers evenly BACK from neutral. Slow down and
repeat.
Note: Practice backing up for several minutes before attempting
to do so near objects. The zero-turn riding mower turns sharply
in reverse as well as forward, and backing up straight takes
practice.
Practice Turning Around a Corner
18
14
While traveling forward allow one handle to gradually return
back toward neutral. Repeat several times.
Note: To prevent pivoting directly on the tire tread, it is best to
keep both wheels going at least slightly forward.
Practice Turning In Place
15
To turn in place, "Zero-Turn," gradually move one ground speed
control lever forward from neutral and one lever back from
neutral simultaneously. Repeat several times.
Note: Changing the amount each lever is pulled—forward or
back, changes the "pivot point" you turn on.
Advanced Driving
Executing an End-Of-Row Zero Turn
ferrismowers.com