Servicing, Maintenance And Component Replacement - Lincat ECO8 Installation, Operating And Servicing Instruction

SERVICING, MAINTENANCE AND
COMPONENT REPLACEMENT
Door inner glass
Slide the glass up and out of the lower clamps, slide down to remove from upper
clamps.
Slide new glass into lower clamps. Clip into top clamps.
Light bulb
Carefully remove the glass cover using a flat bladed screwdriver. Unscrew the
bulb.
Fit new bulb and replace cover.
Shelf racks
(Fig 4 – Door removed for clarity)
To remove shelf racks, swivel locking tabs (A) and lift rack upwards. Lift the rack
free from lower retaining pins, then tilt bottom inwards and lower from top retaining
pins to remove.
Refit by sliding rack upwards onto upper retaining pins, then pull down over lower
retaining pins. Secure by swivelling locking tabs down.
On ECO9, use inner pins for shelves, outer pins for standard baking trays.
IS 331 ECN 3823 Page 8 of 12