Thank you for purchasing this Lincat product. With correct use and careful maintenance as described in these instructions, your Lincat product will give years of trouble free use. We produce over 450 different items of catering equipment and our range is constantly being extended and improved.
Remove all plastic coatings and clean the unit before use. • Ensure that the electrical supply cable is not damaged. If it is, it must be replaced by Lincat Ltd or by qualified personnel. • Always disconnect the unit from the electricity supply before servicing.
Low level floor stands with 4 runners for ECO9/LFS GN containers Stacking kit ECO8/SK Stacking kits required for safe stacking of ECO9/SK one unit on top of another Important: For stability, a matching low level floor stand ECO8/LFS or ECO9/LFS must also be used IS331 ECN3191...
• For safety regulations the plug or means of disconnection must always be accessible Connecting to the electricity supply ECO8 The unit must be earthed Check that the voltage of your electricity supply corresponds to the voltage shown on the serial plate The product is supplied with a 13 amp plug.
Page 6
Connecting to the water supply The water supply pressure must be from 0.2-10 bar Screw one end of the white plastic feed hose to valve (A) on the back of the oven and the other end to your water supply tap. Figure 1: Water Supply Valve VALVE A IS331 ECN3191...
OPERATION Figure 2: ECO8 / ECO9 Oven Controls 1 ON / OFF switch 2 Power supply indicator 3 Oven temperature indicator 4 Temperature control knob 5 Cook and hold switch 6 Cook and hold indicator 7 Cook and hold timer...
Cooking Connect the unit to the electricity supply. The green indicator (2) lights up when there is power to the unit. Make sure the oven door is shut. Turn the mains switch (1) on: the switch lights up. Turn the control knob (4) to the required temperature. The amber indicator (3) will go out when the oven has reached the required temperature.
CLEANING Important: Take care not to damage the thermostat bulbs inside the oven when cleaning. • Clean the unit regularly to maintain efficient performance and hygiene. • Disconnect the unit from the electricity supply and allow to cool before starting to clean •...
Thermostat, 330º C TH12 180 minute timer TI34 60 minute timer TI37 Door handle ball end KN246 Element 3KW ECO8 EL236 Hot air fan, ECO8 FA106 Inner glass GL205 Power cable, plug & lead PL202 Door seal SE76 Contactor CO112...
From serial plate • Serial number Lincat reserve the right to carry out any work under warranty during normal working hours, ie Monday to Friday, 08:30 a.m. – 17:00 p.m. GUARANTEE This unit carries a comprehensive UK twelve-month warranty. The guarantee is in addition to, and does not diminish your statutory or legal rights.
Page 12
This page intentionally left blank IS331 ECN3191...
Page 13
This page intentionally left blank IS331 ECN3191...