Calibration Number; Local Operator Interface (Loi); Field Communicator Interface - Emerson Rosemount 8712EM Quick Start Manual

November 2017

Calibration number

The sensor calibration number is a 16-digit number generated at the factory
during flow calibration, is unique to each sensor, and is located on the sensor
tag.
6.2

Local operator interface (LOI)

To access the transmitter menu, press the XMTR MENU key. Use the UP,
DOWN, LEFT(E), and RIGHT arrows to navigate the menu structure. A
complete map of the LOI menu structure is shown in the product reference
manual.
The display can be locked to prevent unintentional configuration changes.
The display lock can be activated through a HART communication device, or
by holding the UP arrow for three seconds and then following the on-screen
instructions.
When the display lock is activated, a lock symbol will appear in the lower
right hand corner of the display. To deactivate the display lock, hold the UP
arrow for three seconds and follow the on-screen instructions. Once
deactivated, the lock symbol will no longer appear in the lower right hand
corner of the display.
6.3

Field Communicator interface

Use the menu paths to configure basic setup of the transmitter using a field
communicator.
Table 6-1:
Function
Basic Setup
Flow Units
PV Upper Range Value (URV)
PV Lower Range Value (LRV)
Calibration Number
Line Size
Tag
Long Tag
Overview
Quick Start Guide
Basic setup menu paths
Menu path
Configure > Manual Setup > Basic Setup
Configure > Manual Setup > Basic Setup > Flow Units
Configure > Manual Setup > Basic Setup > AO > URV
Configure > Manual Setup > Basic Setup > AO > LRV
Configure > Manual Setup > Basic Setup > Setup > Calibration
number
Configure > Manual Setup > Basic Setup > Setup > Line Size
Configure > Manual Setup > Device Info > Identification > Tag
Configure > Manual Setup > Device Info > Identification > Long
Tag
Overview
Quick Start Guide
31