Rip - SMC Networks barricade SMCWBR14-G2 User Manual

C
ONFIGURING THE

RIP

RIP sends routing-update messages at regular intervals and when the
network topology changes.
Parameter
General RIP
Parameters
RIP mode
Auto summary
Table of current
Interface RIP
parameter
Interface
Operation Mode Disable: RIP disabled on this interface.
4-70
B
ARRICADE
Description
Globally enables or disables RIP.
If Auto summary is disabled, then RIP packets will include
sub-network information from all subnetworks connected to
the router. If enabled, this sub-network information will be
summarized to one piece of information covering all
subnetworks.
The WAN interface to be configured.
Enable: RIP enabled on this interface.
Silent: Listens for route broadcasts and updates its route table.
It does not participate in sending route broadcasts.