Routing Table - SMC Networks barricade SMCWBR14-G2 User Manual

C
ONFIGURING THE

Routing Table

Click Routing Table to view the screen below.
Parameter
Flags
Network Address
Netmask
Gateway
Interface
Metric
4-72
B
ARRICADE
Description
Indicates the route status:
C = Direct connection on the same subnet.
S = Static route.
R = RIP (Routing Information Protocol) assigned route.
I = ICMP (Internet Control Message Protocol) Redirect route.
Destination IP address.
The subnetwork associated with the destination.
This is a template that identifies the address bits in the
destination address used for routing to specific subnets. Each
bit that corresponds to a "1" is part of the subnet mask
number; each bit that corresponds to "0" is part of the host
number.
The IP address of the router at the next hop to which frames
are forwarded.
The local interface through which the next hop of this route is
reached.
When a router receives a routing update that contains a new or
changed destination network entry, the router adds 1 to the
metric value indicated in the update and enters the network in
the routing table.