Attach The Ez-Stream Wireless Router To The Internet; Connecting The Power Adapter - SMC Networks EZ-Stream SMC2304WBR-AG User Manual

Installing the EZ-Stream Wireless Router

3.3 | Attach the EZ-Stream Wireless Router to the Internet

If Internet services are provided through an xDSL or cable modem, use
unshielded or shielded twisted-pair Ethernet cable (Category 3 or
greater) with RJ-45 plugs to connect the broadband modem directly
to the WAN port on the Router.
12
(Primary)
Figure 3-4. Making the WAN Connection
Note: When connecting to the WAN port, use 100-ohm

3.4 | Connecting the Power Adapter

Plug the power adapter into the power socket on the Router, and the
other end into a power outlet. Check the indicator marked "PWR" on
the front panel to be sure it is on. If the power indicator does not
light, refer to "Troubleshooting" on page 76.
10
ISP
Category 3, 4, or 5 shielded or unshielded twisted-pair
cable with RJ-45 connectors at both ends for all
connections.
DSL/Cable
Modem