System Requirements - SMC Networks SMC Barricade Plus SMC7004WFW User Manual

I
NSTALLATION
Item
LEDs
Wireless
Antennas
Reset
Button
WAN
Port
LAN
Ports
Power
Inlet

System Requirements

You must have an ISP that meets the following minimum
requirements:
• Internet access from your Internet Service Provider (ISP) using an
xDSL modem, or cable modem.
• A PC using a fixed IP address or dynamic IP address assignment
via DHCP, as well as a gateway server address and DNS server
address from your service provider.
• For wired LAN connection, you need a computer equipped with
a 10 Mbps, 100 Mbps, or 10/100 Mbps Fast Ethernet card, or a
USB-to-Ethernet converter. For wireless LAN connections, each
computer must have an 11 Mbps wireless adapter.
2-4
Description
Power, WLAN, WAN and LAN port status indicators.
(See Verify Port Status on page 2-11.)
Dual antennas provide optimal reception by dynamically
choosing the best antenna for each client.
Use this button to reset the power and restore the default
factory settings.
WAN port (RJ-45). Connect your Cable modem, xDSL modem,
or an Ethernet router to this port.
Fast Ethernet ports (RJ-45). Connect devices on your local area
network to these ports (such as a PC, hub or switch).
Connect the included power adapter to this inlet.
Warning: Using the wrong type of power adapter may
cause damage.