Basic Installation Procedure - SMC Networks Barricade SMCWBR14-G User Manual

Basic Installation Procedure

1. Connect the LAN: Connect the Wireless Barricade to your
PC, or to a hub or switch. Run Ethernet cable from one of the
LAN ports on the rear of the Wireless Barricade to your
computer's network adapter or to another network device.
You may also connect the Wireless Barricade to your PC
(using a wireless client adapter) via radio signals.
2. Connect the WAN: Use an Ethernet cable for connecting the
Wireless Barricade to a cable/xDSL modem or Ethernet router.
3. Power on: Connect the power adapter to the Wireless
Barricade.
Internet
Figure 2. Example Network Configuration
Internet
Access
Device
Wireless
Broadband
SOHO Office or Residence
Connect the System
Cable/DSL
Router
Notebook with
Wireless PC Card
7