The following figure shows the components of the Wireless
Barricade:
Figure 1. Front and Rear Panels
Item
Description
LEDs
Power, WLAN, WAN and LAN port status indicators.
(See "LED Indicators" on page 1.)
LAN
Fast Ethernet ports (RJ-45). Connect devices (such as a PC, hub
Ports
or switch) on your local area network to these ports.
Reset
Use this button to reset the power and restore the default factory
Button
settings.
WAN
WAN port (RJ-45). Connect your cable modem, DSL modem, or an
Port
Ethernet router to this port.
Power
Connect the included power adapter to this inlet.
Inlet
Warning: Using the wrong type of power adapter may damage
your Wireless Barricade.
Hardware Description
5