7.8.6 | DMZ
If you have a local client PC that cannot run an Internet application properly from behind the NAT firewall,
then you can open the client up to unrestricted two-way Internet access by defining a Virtual DMZ Host.
7.9 | Advanced Setup - SNMP
The Simple Network Management Protocol (SNMP) lets you manage a computer network remotely by
polling and setting terminal values and monitoring network events.
•
Enable SNMP: You can check Local, Remote, or both options to enable the SNMP function.
If Local is checked, the router responds only to requests from the LAN.
If Remote is checked, the router responds only to requests from the WAN.
•
Get Community: Setting this option allows the router respond to a request.
•
Set Community: Setting this option allows your router to accept a request.
37