Table Of Contents - High Tech Pet POWER PET Installation And Operating Instructions Manual

Power Pet, Regular Height, Patio Door Assembly Steps
Estimated assembly time: Under 1 hour
STEP 1: Assemble the tools you will need:
1. Size #1 Phillips screwdriver
2. Electric drill
3. #32 (.117") drill bit
4. 3/32" drill bit
5. 1/4 drill bit
6. Scissors
7. Tape Measure
8. Pencil
9. Safety Glasses
STEP 2. Unpack your door
Remove all parts from box. Plastic corner protectors may be discarded.
STEP 3: Lay Out All Included Parts
Your door contains all of the parts shown in Figures 3A and 3B and
listed below.
1. Bottom Panel Assembly with PX-2 Power Pet Door
2. Top Panel Assembly
3. MS-4 Ultrasonic Collar or MS-5 Collar Kit
4. AC Adapter
5. Range Knobs (2)
6. Weather Stripping
7. Draft Stopper Seal
8. Section Connectors (2)
9. Door Lock Housing (1)
10. Lock Handle (1)
11. Lock Hasp (1)
12. House Lock Tab (2)
13. Vacation Lock (1)
14. Rectangular Hole Plug (1)
15. Round Hold Plug (2)
16. 1/16 Allen wrench
17. 1/8 Allen wrench
18. 1/4-20 X 1/2 flat head machine screw (8)
19. #8 X 5/8 round head sheet metal screw (4)
20. #6 X 1/2 round head sheet metal screw (6)
21. #4 X 3/8 flat head sheet metal screw (4)
2
Figure 1
Figure 2