High Tech Pet POWER PET Installation And Operating Instructions Manual page 10

STEP 15: Insert Round Hole Plug(s)
The purpose of the Round Hole Plugs is to fill the
unused Lock Knob hole. Lock Knob holes are
provided on both sides of the Top Panel
Assembly for left and right opening sliding glass
doors. When using the Universal Lock Assembly,
one Lock Knob hole will not be used. Install a
Round Hole Plug in the unused Lock Hole on the
side of the pet door assembly which butts
against your sliding glass door track. This is the
side that does not require the lock. If you chose
not to use the Universal Lock Assembly, install a
Round Hole Plug in both Lock Knob Holes.
Fig 15
STEP 16: Engage the House Lock Tabs
Fig 16B
Fig 16A
Slide the assembled pet door so that it butts up against the inside of your sliding glass door track. Firmly
grab the pet door from the inside and outside. Lift up and push against the sliding glass door track
letting the House Lock Tabs engage each other as the door frame drops into its final position.
10