SMC Networks Barricade SMC2404WBR User Manual page 126

Try setting 2000, 2050, 2069, 2085, 3010, and 2019 as triggers. Then set the
public ports to 2000-3030. If you still experience problems, set the public
ports to 1-64535 (note: this opens a WIDE range of ports). You can also try
putting your machine in the DMZ (go into Misc. Items) and make sure that
you have the latest firmware.
Q. How do I get an MSN Game to work properly through the firewall?
A. Here is all the info we have on the Gaming Zone:
MSN Game Zone
IN TCP 6667
IN TCP 28800 - 29000
for DX play also open these ports:
IN TCP 47624
IN TCP 2300 - 2400
IN UDP 2300 - 2400
Try setting 6667, 28800, 29000, 47624, 2300, and 2400 as triggers. Then set
the public ports to 2300-2400,28800-29000,6667,47624. If you still
experience problems, set the public ports to 1-64535 (note: this opens a
WIDE range of ports). You can also try putting your machine in the DMZ
(go into Misc. Items) and make sure that you have the latest firmware.
Support Info:
http://support.microsoft.com/support/kb/articles/q159/0/31.asp
DX support page
http://support.microsoft.com/support/kb/articles/Q240/4/29.ASP
http://support.microsoft.com/support/kb/articles/q236/4/30.asp
Q. How do I set up an ftp server behind the router?
A. You need to set up the router to forward your ftp ports to your server
machine. Simply log into the router and click on Virtual Server. Then put in
the ftp port that you are running your server on (standard port is 21). Also,
enter in a service port that is one number below your ftp port (i.e. - if you put
in 21, you will also need to put 20). This is the data port. Then where it says
192.168.2.XXX, type in the last octet of the SERVER machine's IP address.
Then set the public and private ports to TCP. Your colleagues can then
connect to your server by using the PUBLIC IP that your ISP has given you.
In the current version of firmware, the virtual server loop-back does not