Ipsec Settings Guide (For Reference/Example Only); Tunnel Between Two Smcbr14Vpn; Settings For Router 1 - SMC Networks Barricade BR14VPN User Manual

8 | IPSec Settings Guide (For Reference/Example Only)

8.1 | Tunnel between two SMCBR14VPN

The easiest way to construct a VPN tunnel between two sites is to use two SMCBR14VPNs,
which are connected to the internet.
The steps to follow to create an IP tunnel between are the following:
• Step 1: Go to the VPN section and select the enable checkbox for [VPN]
• Step 2: Select the number of Tunnels you want to enable
• Step 3: Enter a Tunnel Name, select IKE or MANUAL for the method and click [More]
• Step 4: Local subnet value is the LAN SUBNET
• Step 5: Local netmask value is the LAN SUBNET MASK
• Step 6: Remote subnet value is the LAN SUBNET of the REMOTE NETWORK
• Step 7: Remote netmask value is the LAN SUBNET MASK of the REMOTE NETWORK
• Step 8: Remote gateway value is the WAN IP of the REMOTE NETWORK
• Step 9: Preshare key value is used to determine the network encryption
• Step 10: SAVE SETTINGS and then configure the IKE PROPOSAL and IPSEC
PROPOSAL

8.1.1 | Settings for Router 1

VPN Router WAN IP Address: ip1.smc.com
1 LAN IP Address: 192.168.1.1
PC 192.168.1.xxx
47