Table of Contents
Advertisement
WPL USER GUIDE
WPL Connections
The WPL has two parallel-wired Neutrik® NL4 connectors on an angled panel at the rear of the cabinet, recessed to avoid damage. Connect
speaker cables here (fig. 4).
fig. 4
The two NL4s are wired in parallel so either can be used as a nominal 'input' or 'link' output. Since WPL is a bi-amped system all
speaker cables and link cables must utilise 4-core cable. When the system is configured for a single box resolution system each cabinet is
connected to two amplifier channels. In two box resolution, connection is made from an amplifier channel to the 'input' of one cabinet and
the second 'link' NL4 is used to make a parallel connection to the adjacent cabinet. The maximum is two box resolution with two cabinets
connected to two amplifier channels (one for LF one for HF).
WPL USER GUIDE V1.0
Copyright © 2019 Martin Audio Ltd.
16
Advertisement
Table of Contents
