Vu-Net 2.2; Overview - Martin Audio WPL User Manual

Optimised line array

Table of Contents

WPL USER GUIDE

VU-NET 2.2

VU-NET is Martin Audio's application which is used to connect to iKON amplifiers and a growing number of products including the MLA

family, CDD-LIVE!, PSX and DD12. This makes it possible to create a system with products from several different ranges and control and

monitor them from a single software platform.

Connection to iKON amplifiers is made over a standard Ethernet network using off the shelf networking products so remote access to

control Wavefront Precision systems is extremely straightforward. Complex systems with large numbers of amplifiers can easily be created

using standard network switches, the system by default is configured with dynamic IP addressing so DHCP support will be required however

a static IP configuration is also easily enabled.

VU-NET is used to upload the presets created using DISPLAY 2.3 into the amplifiers which will automatically create a thumbnail of the

Wavefront Precision array that has been designed. Once the array has been created, all of the amplifier functions are available for control

to make any changes you may need to routing, crossover point, phase, delay or system EQ. The application has an intuitive GUI making

is very quick and easy to get to grips with if you have used any computer-based processing software. Once the system is configured the

amplifiers can be kept online to give comprehensive monitoring of the system performance.

The application opens with a blank system diagram. It is possible to add products manually using the 'Palette' on the left but this has

limited use, in practical applications, the 'Discover Devices' button is used.

The application searches the network for all VU-NET enabled devices and will run an installation wizard to add them to the VU-NET project.

WPL USER GUIDE V1.0

Table of Contents