Software Version Checking; Restore Initial Setting - BITMAIN S4+ Manual

S4+ Server Manual
Last updated: 4/22/2015
Page 9 of 10

6.3 Software Version Checking

You can check which version of the software you are currently running on the 'System-
>Overview' page. 'File System version' displays the date of the firmware your server use. In
the example below, the server is using 20150402 firmware.

6.4 Restore Initial Setting

There is a 'Reset' button on the left hand side of the IP Reporter button, press and hold the
button for 5 seconds in order to restore to the default settings and reboot. The red LED will flash
once every 15 seconds automatically if the reset is operated successfully.
Page 9 / 10