Using The Configuration Menu; Preparation - Universal Electronics Hashi User Manual

Hashi User Manual
Supports 64/128-bit WEP encryption, WPA/WPA2, WPA-PSK/WPA2-PSK data security
Supports MAC/IP filtering and URL filtering
Supports DHCP server
Supports Web user interface
Supports System status and security log
Supports Firmware upgradeable

3 Using the Configuration Menu

Please conclude the steps of installing Hashi as below:
A. Power on Hashi
B. Use an Ethernet cable to connect Hashi to your PC with windows OS.
C. Configure the IP address of your PC so that your PC can be connected with Hashi successfully.
D. Works on the screen of your PC to configure Hashi and connect your Hashi to the current home
E. WIFI wireless broadband router.
F. Use an Ethernet cable to connect one of the Lan ports of Hashi to the Ethernet Port of your
Setup box.
G. Connect your tablet/Smartphone to the same Home WIFI wireless broadband router as Hashi
H. Install Nevosmart on your tablet/Smartphone

3.1 Preparation

First of all, please connect the cables and power adapters as below before configuring Hashi
software interface.
Step 1
Use the attached power adapter to connect with the power interface of Hashi, plug the other end of
the power adapter to the power socket.
Step 2
Use an Ethernet cable to connect the one of the LAN ports (Ethernet Ports) of Hashi to the
Ethernet port of your PC with Windows OS.
Step 3
Configure IP addresses for your PC as below: Please click Start > Settings > Control Panel >
Network Connections. Or if you are in Start menu view, click Start > Control Panel > Network
Connections.
Step 4
Double click Local Area Connection.
3