Table of Contents
Advertisement
Hashi User Manual
3. Default Gateway: You can enter the Gateway IP address here.
4. DHCP:
Enabled – select it if you want to user Hashi as a DHCP server, and enter the starting IP
address and ending IP address for the DHCP server's IP assignment.
5. DHCP Client Range: Enter the starting IP address and ending IP address here.
6. Domain Name: Enter the domain name here.
7. 802.1d Spanning Tree:
The 802.1d Spanning Tree is designed at a time when the recovery of connectivity after an
outage within a minute or so is considered adequate performance.
8. Clone MAC Address:
Some service providers require you to register a MAC address in order to access the Internet.
The Clone MAC Address screen lets you use the MAC address of a device that has already been
registered with your service provider, by copying that MAC address to the device.
3.5 QOS
The QOS screen allows you to specify priorities for different types of traffic. Lower priority traffic
will be slowed down to allow greater throughput or less delay for high priority traffic.
3.6 Security
Port Filtering
16
Advertisement
Table of Contents
