Universal Electronics Hashi User Manual page 24

Hashi User Manual
1. Gateway: If you select Gateway, The NAT is enabled.
2. Bridge: If you select Bridge, all LAN ports and wireless interfaces are bridged together,
firewall is not supported.
3. Wireless ISP: In this mode, all LAN ports are bridged together and the wireless client will
connect to ISP access point. The NAT is enabled. You can set the wireless to client mode and
connect to the ISP AP in Site-survey page.
System Settings
1. Save Configuration:
The current system settings can be saved as a file onto the local hard drive only clicking Save
button. The saved file or any other saved setting file created by the Hashi can be uploaded into the
unit.
2. Upload Configuration:
The saved file or any other saved setting file created by the Hashi can be uploaded into the unit.
To reload a system settings file, click on browse to search the local hard drive for the file to be
used, then click Upload button when finished.
3. Factory Default:
The device can also be reset back to factory default setting by clicking Default button. Use the
restore feature only if necessary. This will erase previously saved setting for the unit. Save your
system settings before doing a factory restore.
Reboot
Click Reboot button to restart the Hashi.
23