Universal Electronics Hashi User Manual page 22

Hashi User Manual
2. IP Address:
Enter the IP address of the computer on your local network that you want to allow the incoming
service to.
3. Protocol: Select TCP, UDP or TCP+UDP, if you are not sure, select TCP+UDP.
4. Port Range:
Enter the port range of the computer on your local network that you want to allow the incoming
service to.
5. Comment: Enter a name for your virtual server entry.
DDNS
The DDNS (Dynamic Domain Name System) screen allows you to assign a fixed host and
domain name to a network computer that has been assigned a dynamic Internet IP address. This is
useful when you are hosting your own website, FTP server, or other server behind the device.
1. Enable DDNS:
Select it to enable DDNS. When an IP address is automatically assigned by a DHCP server,
DDNS automatically updates the DNS server.
2. Service Provider: Choose your DDNS provider from the drop down menu.
3. Domain Name: Enter the Host name that you registered with your DDNS service provider.
4. User Name: Enter the User name for your DDNS account.
5. Password: Enter the Password for your DDNS account.
NTP
The NTP setting allows you to configure, update and maintain the correct time on the internal
system clock. From this section you can set the time zone that you are in and set the Time Server.
Daylight Saving can also be configured to automatically adjust the time when needed.
21