Table of Contents
Advertisement
Hashi User Manual
1. Enable Port Filtering: Select it to apply the port filtering policy.
2. Port Range:
Enter in the port range of the TCP/UDP ports that you want the policy to apply to. If it is only a
single port that you want the policy applied to, then enter the same port number in the Port Range
blank.
3. Protocol: Select the protocol type to allow or deny certain ports.
MAC Filtering
1. Enable MAC Filtering: Select it to apply the MAC filtering policy.
2. MAC Address: Enter the MAC address which you want to set. For example: 00e2a3b34c156
17
Advertisement
Table of Contents
