Universal Electronics Hashi User Manual page 11

Hashi User Manual
4. SSID:
Service Set Identifier (SSID) is the name of your Hashi, the SSID is case-sensitive.
5. Channel Width:
40MHz This is default setting, Select it if you are using both 802.11n and non-802.11n
wireless devices.
20MHz Select it if you are not using any 802.11n wireless clients.
6. Control Sideband:
Upper Select it so you can change the channel number from 5 to 11.
Lower Select it so you can change the channel number from 1 to 9.
7. Channel Number:
The channel can be changed to fit the channel setting for an existing wireless network or to
customize the wireless network.
8. Broadcast SSID:
Enabled Choose Enabled to broadcast the SSID across the network.
Disabled Choose Disabled if you do not wish to broadcast the SSID over the network.
9. WMM:
The default setting of Wi-Fi MultiMedia is enabled
10. Data Rate:
Select the data rate, the default setting is Auto.
11. Associated Clients:
Show Active Clients
Advanced
1. Fragment Threshold:
It shows the information for each associated wireless client.
10