Table of Contents
Advertisement
4. Mounting and installation
4.1 Delivery range
Transmitter in DIN rail housing
•
Sensor
•
Operating instructions
•
C1-box
•
Welding flange
•
4.2 Auxiliary
Screw driver 2.5 mm
•
Allen key 5 mm
•
4.3 Mounting of the sensor
M-Sens 2 is designed for continuous moisture measurement. Most important conditions for correct
measurement is the right choice of the mounting place of the sensor. That is, when using chutes or conveyor
belts, it is very important to have a almost even material height in front of the sensor window.
The flange is welded without sensor and dummy plate in the opening at determined mounting place.
•
Sensor and dummy plate are mounting by means of plumbing lubricant. For applications without over-
pressure it is possible to renounce the 2 sealing rings.
Attention!
The flange mustn't be welded together with the sensor or dummy plate (incl. the sealing rings).
6
Advertisement
Table of Contents
