Menu Parameters - SWR Envea M-Sens 2 Operating Instructions Manual

8. Menu parameters:

1.1 MEASURING RANGE
Product name
Unit
Decimal point
Beginning of
measuring range
End of
measuring range
Filter value
1.2 ALARM 1
Alarm type
Alarm value
Alarm dead time
Alarm hysteresis
Operation mode
1.3 ALARM 2 wie ALARM 1
Freely selectable symbols of the measuring-medium or -place, max. 8 digits.
Selection % H O or % TS
2
Adjust the digit in the display.
Enter the respective value of the measuring range you will start with.
Enter the respective value of the measuring range end.
Adjustable damping for the display in seconds. Range: 0.1 ... 999.9 s
Effect on the relay.
Upper and lower limit value.
Threshold value
Range 0 ... 100 % of the measuring range in phys. units.
Threshold value how long the value must be over or under the limit until the
alarm relay reacts. Range: 0.1 ... 99.9 s
Threshold value of the alarm.
Range: 0.1 ... 99.9 % of the specified measuring range.
Choice of the contact work or rest
NO (working current) - NC (static current)
18