4. Operation
Master-8 is simple to operate and can be learned in a short time.
Each instruction is carried out only after pressing the ENTER key. As long as the
ENTER key has not been pressed, the instruction can be changed or deleted by
giving new instructions (e.g. the CLEAR-DISPLAY instruction).
4.1
Parameters
You can set the following parameters for each channel (see Figure 2):
●
●
●
●
8
DURA (duration) - defines the time elapsed from the onset of the output
pulse to its end.
DELAY - defines the time elapsed from the beginning of the input trigger to
the beginning of the output pulse.
INTER (interval) - defines the time elapsed between the beginning of a pulse
and the beginning of the following pulse (interval = 1/rate).
M - defines the number of pulses per train in the TRAIN mode.
delay
interval
Figure 2
duration