External Inputs - A.M.P.I. Master-8 Operation Manual

It is possible to disconnect all inputs or outputs of any single channel.
Example 3: To disconnect all internal outputs from channel #5 -
Press keys: 'CONNECT, CONNECT, 5, ALL, ENTER'.
Example 4: To disconnect all internal inputs to channel #5 -
Press keys: 'CONNECT, CONNECT, ALL, 5, ENTER'.
Example 5: To disconnect all internal inputs and outputs from all channels -
Press keys: 'CONNECT, CONNECT, ALL, ALL, ENTER'.
9.3

External Inputs

In the modes: TRAIN, TRIG or GATE channels 1 and 2 can be triggered or
gated externally. EXT 1 activates only channel 1. EXT 2 activates only
channel 2. (channels 1 and 2 can activate the other channels internally).
The external input has to be in the range of 5 to 10V.
Note:
A computer can trigger each channel directly 'manually' via the USB interface of
Master-8-cp (see Section 14).
20