A.M.P.I. Master-8 Operation Manual page 14

16. Switch the power on. Master-8 immediately continues working in the last
paradigm, exactly as before you switched the power off.
17. Switch to paradigm #1.
Press keys: 'ALL, 1, ENTER'.
Note:
This paradigm is also stored in the memory after switching the power off.
18. Before continuing, clear all the Master-8 memory (see Section 11) -
Press keys: 'OFF, ALL, ALL, ALL, ENTER'.
Dear User,
The last section was a brief demonstration of how to use Master-8.
Now you have a rough idea of how Master-8 works. However, here are many
instructions that you are not yet familiar with e.g. DC, GATE, CHECK,
TIMER. Even the features that are demonstrated above are only partially
demonstrated.
Please read the rest of this manual carefully so that you will not miss any
important feature. Sections 7 to 13 deal with the operation of Master-8.
Section 14 is about the communication between Master-8-cp and a computer.
14