Olympus FL-900R Instructions Manual page 31

• Slide the fl ash securely onto the stand ( 2 ).
• Slide the latch to the [LOCKD] position to latch the
fl ash in place.
• To remove the fl ash, undo the latch and slide the
unit from the stand.
2
Position the fl ash with the remote sensor facing the camera.
• We recommend using a single group of up to three remote fl ash units.
• Take a test shot after positioning.
• Flash may not fi re due to the angle or distance between the camera and
the object.
Using the Flash to Control Other Units Using the Flash to Control Other Units
Adjusting Camera and Flash Settings Adjusting Camera and Flash Settings
1
Attach the fl ash to the camera (P. 24).
2
Select RC mode on the camera.
3
Choose [TTL-AUTO] as the fl ash control mode
(P. 26).
2
3
31
EN