Reinstallation Of The Software; Cause / Remedy - Siemens Simatic PG 740 PIII Operating Instructions Manual

Reinstallation of the Software

6.1

Cause / Remedy

In case of software errors reinstall your software using the Recovery Windows CD
and CD "Backup PG720/740".
To restore all directories and files that were copied to your hard disk after the first
set up proceed as follows:
1. If it is possible to save your authorization proceed as described below.
2. If it is not possible to save your authorization please contact the customer
support hotline ( see chapter 8). They will provide you with the information
neccessary for your authorization.
Then proceed as described in chapter 6.2.
Saving authorization on diskettes
Please proceed as follows:
S Insert authorization disk in drive A
S Click "Start" on the Windows task bar and
S select Simatic > AuthorsW > AuthorsW to open the authorization tool which
will help you to save all authorizations on your authorization disk.
Note
The authorization disk and the authorization tool are not delivered with all versions.
Operating Instructions PG 740 PIII
A5E00063150-03
Siemens Drives & PLCs
6
6-1