Siemens Simatic PG 740 PIII Operating Instructions Manual page 35

PC Cards
Proceed as follows while working with PC cards:
Caution
!
Before inserting PC-Cards please make sure that the PC-Card Ejector is
completely pressed otherwise the cards e.g. Flash Memory Cards) could get stuck
in the slot.
The PC-Cards can not be inserted correctly.
PC Cards must be inserted with the type label pointing towards the CD-ROM disk
drive.
Caution
!
Before inserting or removing PC cards, you must discharge the electrostatic
charge of your body by briefly touching a grounded object
(see ESD guidelines in the PG 740 PIII manual). Otherwise faults could occur.
The cardbus controller occupies the I/O area from 0x3E0 to 0x3E1.
Operating Instructions PG 740 PIII
A5E00063150-03
Siemens Drives & PLCs
Hardware Components of the PG 740 PIII
Ejector
3-13