Table of Contents
Advertisement
3. Safety information
Since the UPS unit operates on line power and contains a bank of high-current backup
batteries, the information in this chapter is important to all personnel involved.
3.1 Storage and transportation
Because of the heavy weight of the cabinets and the high energy battery bank the
equipment must be handled with care. The UPS must always be kept in the position
marked on the package and must not be dropped.
3.2 Installation
Do not operate the equipment in the presence of flammable gases or fumes. Operation
of any electrical equipment in such an environment constitutes a safety hazard. Do not
place the UPS in an airtight room.
The UPS system must be installed according to the instructions in this manual.
Installation may be performed by qualified personnel only. Failure to recognise the
electrical hazards could prove fatal.
WARNING!
Do not open the UPS or battery cabinet! Some components inside the cabinets
carry high voltages. To touch them may prove fatal. All operations inside the
cabinets must be carried out only by a service engineer from the manufacturer or
from an agent authorised by the manufacturer.
3.3 User operations
The only user operations permitted are:
•
Starting up and shutting down the UPS unit (not the initial start up).
•
Operating the user interface.
•
Connecting data interface cables.
•
Monitoring the UPS with software provided by Powerware.
These operations must be performed according to the instructions in this manual. During
any of these operations, the user must take greatest care, and perform only the prescribed
operations. Any deviation from the instructions could be dangerous to the operator.
4. Shipping and handling
The UPS equipment is shipped on specifically designed pallets so that it is easy to move
with a forklift or pallet jack.
Do not stack the pallets.
Because of the sensitive electronics and high energy stored within batteries, the UPS and
the battery cabinet must be handled with care. The UPS and battery cabinet must always
be kept in an upright position and must not be dropped.
Because of the heavy weight of the UPS system proper provision must be made for
transportation. See technical specifications for dimensions and weights of the UPS.
10
80 kVA - 130 kVA UPS
User's and Installation Manual
1017397
Revision D (update)
Advertisement
Table of Contents
