Dismantling The Main Cable - Husqvarna 536LiBX Workshop Manual

Repair instructions

7.8 Dismantling the main cable

1
Loosen the contact spring that is located in the
cover over the electronics.
See Chapter 7.4.
2
Dismantle the motor housing/blow pipe.
See Chapter 7.6.
3
Loosen the screw and lift off the cover.
See figure 24
4
(436LiB, 536LiB)
Loosen the screws (2x) for the battery contact.
See figure 25a.
(536LiBX)
Loosen the screws holding the battery cable.
See figure 25b.
NOTE!
The flat cable to the keypad is very fragile.
28
– English
Fig 24
Fig 25a
Fig 25b