Table of Contents
Advertisement
1. Current contacts
Make sure the contacts are clean and that none of
the metal surfaces are damaged. Take extra care in
checking the connection tabs. The current contacts
have the same basic design for product, battery
and charger. It is only the colors that can differ.
2. Breaker signal contact
Make sure the female contact is securely con-
nected to the breaker. Look for damaged and loose
cables. Look also for signs of water, corrosion and
short circuiting on the contact and pins when they
are dismantled.
3. Motor contact
Make sure the motor contact is secure and as-
sembled correctly, and that the connecting pins are
not damaged.
4. Communication cables
Make sure the three small communication cables
are secure and not damaged.
8.7 Troubleshooting - annexe
Picture 1
Picture 2
Figure 3
Fig. 4
Troubleshooting - annexe
English –
42
Advertisement
Table of Contents
