How To Check A Fuse - Sunrise spas Classic Collection Series Owner's Manual

HOW TO CHECK A FUSE

Note: You should only remove/check a fuse if you feel comfortable doing so. Do not risk personal injury. If in doubt,
contact your service technician.
Fuses are located within the wiring compartment. Always replace fuses with the same style and amp value as shown
on the label inside the wiring compartment!
Small Glass Fuses
1) Shut off power to the spa.
2) Use a small screwdriver or pliers to gently remove the fuse from its fuse holder.
3) View the filament inside the fuse and replace if broken.
4) Use an ohmmeter to check the fuse. Ohms reading should be towards 0 ohms. A reading of infinity means the
fuse is open and must be replaced.
Cartridge Fuses & Small Cartridge Fuses
1) Shut off power to the spa.
2) Use pliers to remove the fuse from its fuse holder.
3) Replace fuse and test system.
These types of fuses are available from your local dealer and may be available from local electronic stores and home
centres. Each fuse has a voltage and amp rating listed on it and should be used to obtain a replacement fuse.
Note: A single fuse may protect more than 1 component in your spa.
WARRANTY SERVICE
In the event that you require warranty service, please call the authorized dealer where you purchased the spa. Your
dealer has trained service personnel and an obligation to provide you with excellent after-sales service. We conduct
yearly training classes to update and refresh technicians.
CONFIRMING A SERVICE APPOINTMENT
Have ready the serial number and model number/name of your spa, your date of purchase and store receipt. The spa
model and serial number information can be found on the silver and black data plate attached to the lower right corner
on the equipment side of the spa. It is also located on the Spa Identification Sheet that is within a plastic bag stapled
to the backside of the equipment panel.
European Sunrise Spas 2018 Owner's Manual
DOC: OM-SUNRISE-18E
73