Spa Is Completely “Dead”; Troubleshooting Your Spa - Sunrise spas Classic Collection Series Owner's Manual

TROUBLESHOOTING YOUR SPA

COMMON PROBLEMS AND HOW TO SOLVE THEM
A large number of problems on start-up can be attributed to mis-wiring and
a poor understanding of how the spa operates and its' features. Take the
time to read and understand this manual. If you have any questions contact your
Ground Fault Circuit Interrupter (GFCI) or Residual Current Detector (RCD)
Shuts Off On Initial Start-Up
Probable
Mis-wiring of GFCI/RCD.
cause:
Action: Contact electrician and/or dealer.
Ground Fault Circuit Interrupter (GFCI) or Residual Current Detector (RCD)
Shuts Off (Not on Initial Start-Up)
Probable One or more pieces of equipment is shorting to ground or total current draw exceeds
cause: GFCI/RCD rating.
Action: Contact dealer: DO NOT use spa. Take measures to ensure others do not use spa.
Spa is Completely "Dead" (No Circulation and No Display on Topside Control Panel
Probable GFCI/RCD has tripped (shut off).
cause #1:
Action: Reset GFCI/RCD and monitor for futures trips. Alert dealer if problem persists.
Probable Breaker or fuse before GFCI/RCD is tripped or blown.
cause #2:
Action: Shut off GFCI/RCD, reset breaker or replace fuse, reset GFCI/RCD and test. Contact
electrician or dealer if problem persists.
European Sunrise Spas 2018 Owner's Manual
NOTICE:
dealer.
DOC: OM-SUNRISE-18E
69